Tombstone Stone Engraving Carving Machine Maintenance

Tombstone Stone Engraving Carving Machine Maintenance

How to maintain the stone engraving machine? Changzhou CNC tells you some maintenance precautions.

1. Before maintenance and inspection of the stone carving machine, be sure to cut off the power. Only after the monitor has no display and the main circuit power indicator goes out, it can be carried out.

2. It is recommended that the continuous operation time of the tombstone engraving machine be less than 10 hours per day. Ensure the cleanness of cooling water and the normal operation of the water pump. And never allow the spindle motor to lack water. Regularly replace the cooling water to prevent the water temperature from becoming too high. If the working environment temperature is too low, replace the water in the water tank with antifreeze.

3. After each operation of the machine, pay attention to cleaning. Be sure to clean up the dust on the platform and the transmission system. And regularly (preferably every week) lubricate the transmission system (X, Y, Z three axes). Note: X, Y, Z three-axis guide rails are maintained with oil; high-speed butter is added to the screw rods. If the working environment temperature is too low in winter, the screw rods and rails (generally square rails) should be rinsed with gasoline and then cleaned Add engine oil, otherwise the resistance of the transmission part of the machine will be too large and the machine will be misaligned.